EX6 lowest temp

[richfleek]

I am going to be smoking some bacon that I have curing in a couple of days. Question for y'all.... How do I get my EX6 down to about 160-170 degrees? Appears the lowest I can go is 200

 

[Bluesmoke]

I believe if you set the temp to 200 and put into smokeboost it will get you down to 170 degrees

 

[Goneincognito]

The simple answer is you won't get that low. It's not designed to do it.
SmokeBoost "may" get you lower than 200 but ambient temp plays a lot into it.
SmokeBoost is also a crapshoot so you may have more problems than its worth doing it.

 

[bbqking]

I’ve done bacon a couple times. I just set it at 200 with probes in and take it off once the meat reaches 150.

 

[Corners]

The simple answer is you won't get that low. It's not designed to do it.
SmokeBoost "may" get you lower than 200 but ambient temp plays a lot into it.
SmokeBoost is also a crapshoot so you may have more problems than its worth doing it.

I’m going to use smokboost today. New York strip steaks. So how do I use that and set temp to 220 degree? THEN, how do I get out of that so I can set temp to 550 so I can sear the steaks? TKS in advance.

 

[Goneincognito]

I’m going to use smokboost today. New York strip steaks. So how do I use that and set temp to 220 degree? THEN, how do I get out of that so I can set temp to 550 so I can sear the steaks? TKS in advance.

Im sure you can work out how to change the temp but I gave a more detailed answer in your other post.