Casters?

bbqking

Well-known member
Joined
Mar 2, 2020
Messages
1,382
Reaction score
1,927
Points
113
Location
Phoenix,Az
Grill
EX6, 3, 22” kettles, 18” kettle and a e310 gasser
So how do you replace casters and which ones/what size does a person get?
 
One of the best mods for these Smokefires. I had the larger casters on hand when I received my Smokefire delivery.
 
I brought home a house jack and jacked it up on one end and swapped them out. I think Abmet had an easy way he used.They are threaded in.
I used these.
 

Attachments

  • E050B86E-0236-4C79-865F-10F1C203B43A.png
    E050B86E-0236-4C79-865F-10F1C203B43A.png
    868.6 KB · Views: 93
After looking, it’s just unscrew, then screw in new? Ive seen bolts on the top of the caster threads. Are these bolts used?
 
Yeah...nuts....deez 🔩
I just researched Amazon and even looked for red ones, those ones I and others bought look like the best option to me.
That being said I did get a little rust inside on my wheels, looks like it’s on the metal that is the actual locking brake. They still look good and work great.
 
Last edited:
I brought home a house jack and jacked it up on one end and swapped them out. I think Abmet had an easy way he used.They are threaded in.
I used these.
I have the same ones...makes moving the unit around a breeze.
 
I used a bucket and some scrap wood to raise a side off the ground to install mine. Just don’t go so high that it would tip over.
 
5" Casters should arrive today, Smokefire arrives tomorrow.
 

Latest Discussions

Back
Top